3D print cost calculator

Work out what one 3D print really costs: filament, electricity, printer wear, your time, packaging and failed prints. Then see your profit on Etsy and the price that hits your margin.

Your print

What one print costs

Filament
$1.53
Electricity
$0.09
Printer wear
$0.90
Your time
$3.33
Packaging
$0.85
Failed-print allowance
$0.29
Cost per print
$7.00

Selling it on Etsy

Etsy fees
-$2.73
Profit per sale
$14.27 (59%)
Profit per print hour
$3.17

Price it at $14.75 or more to keep 40% after Etsy's fees.

What goes into the cost of a print

  • Filament. Grams used from your slicer, times your price per kilogram.
  • Electricity. Usually only a few cents, but it adds up on long prints.
  • Printer wear. Nozzles, build plates, belts and eventually the printer itself. $0.10 to $0.30 an hour covers most hobby and prosumer printers.
  • Your time. Removing supports, cleanup, painting, packing. It's easy to leave out and often the biggest cost.
  • Packaging. Box, filler, tape and label for one order.
  • Failed prints. A percentage on top of filament, power, wear and time to cover the prints that don't make it.

From cost to Etsy price

The "Selling it on Etsy" panel takes your cost per print and works out Etsy's listing, transaction and payment processing fees at your price, assuming free shipping built into the price. To compare charging shipping separately or see Offsite Ads, use the Etsy fee calculator.

Profit per print hour is worth watching: a $30 print that ties up the printer for 14 hours can earn less per hour than a $12 print that takes 90 minutes.

Questions

How do I calculate the cost of a 3D print?
Add filament (grams used ÷ 1000 × price per kg), electricity (print hours × printer watts ÷ 1000 × price per kWh), printer wear per hour, your hands-on time and packaging, then add a percentage for failed prints. The calculator does this for you.
Where do I find how much filament a print uses?
Your slicer shows it after slicing: Bambu Studio, OrcaSlicer, PrusaSlicer and Cura all list filament weight in grams and estimated print time.
How much electricity does a 3D printer use?
Most FDM printers average 100 to 150 watts while printing, more with a heated chamber or a large heated bed. At $0.17 per kWh a 120 W printer costs about 2 cents an hour.
What should I charge for 3D prints?
Start from your cost per print, then add Etsy's fees and the margin you want. Many print sellers aim for 40% to 60% margin after fees. Set your target margin and the calculator gives you the price.
Should I count failed prints?
Yes. Every failed print costs filament, time and electricity, and those costs belong to the prints that succeed. 5% is a common starting point; use more for tall, thin or multi-color prints.

Know what every listing really earns

Save your costs once and T3DS Studio puts them against every Etsy sale, with the actual fees and ad charges, so you can see which prints make money and which don't.

Get your free money report

Free plan, no card needed.